- By Hiroaki Kanokogi, PhD
- December 09, 2022
- InTech Magazine
- Feature
Summary
AI-based autonomous control runs a semiconductor plant’s HVAC system. This feature originally appeared in the October 2022 issue of InTech magazine.
As process control technologies advance, one concept gaining prominence is autonomy. When contrasted with conventional automation, one of the main differentiators of autonomy is applying artificial intelligence (AI) so an automation system can learn about the process and make its own operational improvements. Although many companies find this idea intriguing, there is understandable skepticism. The system’s capability is only as good as its foundational algorithms, and many potential users want to see AI in operation somewhere else before buying into the idea wholeheartedly. Those real-world examples are beginning to emerge.
Yokogawa’s autonomous control systems are built around factorial kernel dynamic policy programming (FKDPP), which is an AI reinforcement learning algorithm first developed as a joint project of Yokogawa and the Nara Institute of Science and Technology (NAIST) in 2018. Reinforcement learning techniques have been used successfully in computer games, but extending this methodology to process control has been challenging. It can take millions, or even billions, of trial-and-error cycles for a software program to fully learn a new task.
Since its introduction, FKDPP has been refined and improved for industrial automation systems, typically by working with plant simulation platforms used for operator training and other purposes. Yokogawa and two other companies created a simulation of a vinyl acetate manufacturing plant. The process called for modulating four valves based on input from nine sensors to maximize the volume of products produced, while conforming to quality and safety standards. FKDPP achieved optimized operation with only about 30 trial-and-error cycles—a significant achievement.
This project was presented at the IEEE International Conference in August 2018. By 2020, this technology was capable of controlling entire process manufacturing facilities, albeit on highly sophisticated simulators. So, the next question became, is FKDPP ready for the real world?
From simulation to reality
Yokogawa answered that question at its Komagane semiconductor plant in Miyada-mura, Japan (Figure 1). Here, much of the production takes place in clean room environments under the tightly controlled temperature and humidity conditions necessary to produce defect-free products. The task of the AI system is to operate the heating, ventilation, and air conditioning (HVAC) systems optimally by maintaining required environmental conditions while minimizing energy use.
It is understandable that an actual application selected for this type of experiment would be of modest scale with minimal potential for safety risks. This conservative approach may be less dramatic than one at an oil refinery, but this does not reduce its validity as a proof of concept.
At first glance, operating an HVAC system autonomously might not seem complex. But the HVAC systems supporting the tightly controlled clean room environment account for 30 percent of the total energy consumed by the facility, and so represent a sizeable cost. Japan’s climate varies through the seasons, so there are adjustments necessary at different times of the year to balance heating and cooling, while providing humidity control.
The facility resides in a mountain valley at an elevation of 646 meters (2,119 feet). It has a temperate climate and tends to be relatively cool, with an annual temperature between –9° and 25°C (15.8° and 77°F). The plant produces semiconductor-based pressure sensors (Figure 2) that go into the company’s DPharp pressure transmitter family, so maintaining uninterrupted production is essential. Even though this demonstration is at one of Yokogawa’s own plants, the cost and production risks are no less real than those of an external customer.
The facility’s location is outside the local natural gas distribution system, so liquified petroleum (LP) gas must be brought in to provide steam for heating and humidification. Air cooling runs on conventional grid-supplied electric power. Both systems work in concert as necessary to maintain critical humidity levels.
Complex energy distribution
Considerations surrounding energy use at Japanese manufacturing plants begin with the high domestic cost. Energy in all forms is expensive by global standards, and efficiency is paramount. The Komagane facility uses electric furnaces for silicon wafer processing, and it is necessary to recover as much waste heat as possible from these operations, particularly during winter months.
To be considered a success, the autonomous control system must balance numerous critical objectives, some of which are mutually exclusive. These objectives include:
- Strict temperature and humidity standards in the clean room environment must be maintained for the sake of product quality but with the lowest possible consumption of LP gas and electricity.
- Weather conditions can change significantly over a short span of time, requiring compensation.
- The clean room environment is very large, so there is a high degree of thermal inertia. Consequently, it can take a long time to change the temperature.
- Equipment in the clean room also contributes heat, but this cannot be regulated by the automated control system.
- Waste heat from electric furnaces is used as a heat source instead of LP gas, but the amount available is highly variable, driven by the number of production lines in use at any given time.
- Warmed boiler coolant is the primary heat source for external air. If more heat is necessary than is available from this recovered source, it must come from the boiler burning LP gas.
- Outside air gets heated or cooled based on the local temperature, typically between 3° and 28°C (37.4° and 82.4°F). For the greater part of the year, outside air requires heating.
The existing control strategy (Figure 3) is more complex than it first appears. Below the surface, the mechanisms involved are interconnected in ways that have changed over the years, as plant engineers have worked to increase efficiency.
There have been numerous previous attempts to reduce LP gas consumption without making major new capital equipment investments. These incremental improvements reached their practical limits in 2019, which drove implementation of the new FKDPP-based control strategy in early 2020.
The implementation team selected a slow day during a scheduled production outage to commission the new control system. During that day, the AI system was allowed to do its own experimentation with the equipment to learn its characteristics. After about 20 iterations, the AI system had developed a process model capable of running the full HVAC system well enough to support actual production.
Over the weeks and months of 2020, the AI system continued to refine its model, making routine adjustments to accommodate changes of production volumes and seasonal temperature swings. The ultimate benefit of the new FKDPP-based system was a reduction of LP gas consumption of 3.6 percent after implementation in 2020, based entirely on the new AI strategy, with no major capital investment required.
FKDPP-based AI is one of the primary technologies supporting Yokogawa’s industrial automation to industrial autonomy (IA2IA) transition, complementing conventional proportional-integral-derivative and advanced process control concepts in many situations, and even replacing complex manual operations in other cases. Real-time control using reinforcement learning AI, as demonstrated here, is the next generation of control technology, and it can be used with virtually any manufacturing process to move it closer to fully autonomous operation.
All images courtesy of Yokogawa
This feature originally appeared in the October 2022 issue of InTech magazine. You can read it here: https://www.isa.org/intech-home/2022/october-2022
About The Author
Hiroaki Kanokogi, PhD, is a general manager in the Yokogawa Products Headquarters. He joined Yokogawa in 2007 and is currently pursuing the development, application, and commercialization of AI designed for production sites. Kanokogi is one of the inventors of the FKDPP algorithm, and he was previously engaged in machine learning application R&D at Microsoft Japan. He has a PhD from the University of Tokyo.
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..
Subscribe